Swap Raw Materials between feeders – The EASY wayDo a backup and store it in a safe location in case something goes wrong!Set System in Maintenance Mode
Select right solution for edit the plantsection!
In this example Feeder 1 with Limestone will be swapped with Feeder 2 Clay.
Browse to:
System --> Configuration --> Configuration --> Blx --> subsection --> Merger (for the feeders which needs to have raw materials swapped) --> Feeders --> Feeder 1 -->Feeder SelectionSelect the full line and delete the Limestone Raw Material.
DO NOT SAVE OR HIT RETURN!!!!!!!!!!Go to Feeder 2: And do the Same: Delete the full line with the Clay Raw Material
DO NOT SAVE OR HIT RETURN!!!!!!!!!!Now: Click on RawmaterialId and from the drop down menu select:
Limestone_RMB
Selection Mask: 0
Go back to Feeder 1: Select RawMaterial ID and from the drop down meny select:
Clay_RM
Selection mask: 0
NOW: HIT RETURN AND SAVENow Feeder 2 have Limestone_RMB and Feeder 1 have Clay_RMBRemember to Change the Feeder min and max capacity in the configuration as well!Set system back to operation mode, open BLX and check that the Raw Materials have been swapped between the feeders.It might be needed to do a Refresh to see the changes!Here Clay_RMB is now assigned to Feeder 1 and Limestone_RMB to Feeder 2.