Standard2Solution.Manual procedure

Modified on 2017/08/24 09:16 by MKR Categorized as QCX BlendExpert Mill V8, QCX RoboLab V8

The QCX driver installs standard files for the equipment selected in the import function. These files needs to be converted to solution files to be importet into QCX.

For this purpose is together with the driver installed a small program called: Standard2Solution.

Go to the Windows Main page and search for the program.

When opening it is possible to choose between either converting solution to standards or converting standards to solutions.

Then the path to the files needs to be inserted and the paht for the output solution files (in this example). The QCX Driver place the files in this path:


* Programfiles (x86)\Flsmidth\import\8.4\Qcxdrv\...........



The image below shows the Standard to Solution option.



[image:{UP(Standard2Solution-Manual-procedure)}STandard2Solution_Manual_1.png|medium|left]

'''Alarm Department''': Refers to the group in QCX: f.ex. 884, 883, 882

'''Equipment sequence''': F.ex.: XRF01 (if it is the numer one of the XRF - the next XRF whould be XRF02 and so on)

'''Friendly name''': XRF01, 02,....

'''IP Adress''': Ip adress of the equipment

'''Picture''': Qcx.Equipment.Picture.Default.Pic










When filled out - select Done and the files are saved under the path defined in the previous step and are ready to be imported into QCX.

Meta Keywords:
Meta Description:
Change Comment:

FLSmidth QCX wiki

Standard2Solution.Manual procedure