This warning means that the sum of the oxides including the LOI corrections are about 100%.
BLX is normally per default set up with the following LOI: CaO: 0.786 and MgO: 1.089.
This LOI for CaO assumes that all Ca is bound in CaCO3. This is often not the case and it is therefore OK to lower the value if needed.
This can be corrected by lowering the LOI for CaO to: for instance: 0.686 so the factor multiplied is: 1.686 instead of 1.786. See image 1.
The factor can be lowered in:
- System --> Configuration --> Configuration --> BLX --> Mill --> Dataitem
Remember to select the right solution to be able to change the values.